Dear Microstation-Users I have a problem with the position of a raster. In DGN-Mode the raster with its frame is on the position that also is shown in the element information as origin. When I save the drawing as DWG or DXF the position of the frame differs in one direction with the amount of have a pixel, while the origin shown in elelment information is as in DGN-File. The txt-file shows the details/coordinates of the orthophoto, when it was calculated. The left-corner bottom of the raster should be X=0, Y= 437.2900. The size of the raster is 115.38mx28.45m, Pixels size 1 cm. What to do to get the image on the wanted position when saving as DWG/DXF?
↧