Actually I found a bug that was causing the motion blur to kick in by a massive amount and this would create a single very blurry frame and certainly appear as a flicker in a saved movie during playback. This issue was not seen in every saved movie and could happen more than once in a saved movie or not at all. I finally was able to make a test case that clearing showed this issue and the E-on developers found this to be caused by a jump in focal distance. This issue has been fixed in LumenRT Update 2 which has been posted. Cheers, Jerry
↧
Comment on Solve flickering issue on LumenRT
↧
Enhance Pattern etc.
What would be nice would be to have the border of a pattern have the ability to be "construction". Patterns I am working with now have the border the same color as the the patterns. But the reviewers don't want the borders showing because the borders are on to top of dashed lines and the solid lines print over the dashed lines. So in order to keep all of the pieces of the dropped patterns together I have to group them and then they have no association with patterns any more.
↧
↧
Forum Post: RE: Error 32768
Hi Michael, More than likely the problem is caused by the AVI settings and the CODEC being used is not installed on your machine. You might try WMV instead but the output of WMV and AVI for that matter are not going to produce anywhere near the quality you can get from MP4. Saving to AVI from Fly Through Producer is probably a bad idea, you really should save to sequential frames using BMP or TIFF then you can load those into MicroStation's movie player and save to a movie format from there. Unless you already have a copy of Adobe Premiere then you might want to try Lightworks Non Linear Editor they have a free version that lets you save H264 MP4 movies at 1280x720 resolution. You can load the rendered sequential frames into Lightworks. If you were using the Animator instead of Fly Through Producer (recommended) and you specify that you want your output to be an AVI we actually save to sequential frames and then make the AVI after the frames are rendered. Cheers, Jerry
↧
Forum Post: SIG Virtual Workshop: MicroStation CONNECT Edition - Using the Print Organizer to Batch Print - April 11
Join Samir Haque online Tuesday, April 11, 2017 at 11 a.m. EDT or 10 p.m. EDT for the next MicroStation CONNECT Edition Special Interest Group (SIG) workshop, Using the Print Organizer to Batch Print . Register today ! Both sessions share the same agenda and are structured to keep you engaged, informed, and working optimally. Discussion and demonstration will encompass: How the Print Organizer Works Creating a Plan Set Text Substitutions and Re-symbolization with Pen Tables Using Print Styles Fixed or Variable Print Definitions Renaming by Expressions One Professional Development Hour (PDH) will be applied to each attendee’s Bentley Transcript for self-reporting. Attendance is complimentary.
↧
Forum Post: RE: Highlight (Halo) elements in plot
Sean, You are right about having duplicates of line work, or any element being bad practice. There is another way.... Attach the model to itself as a reference. Give it a logical name something like HALO. Then in a pen table or design script print the elements in the HALO reference with a thicker line weight and a different color. Also make sure the priority of the reference is lower than the priority of the master file.
↧
↧
Wiki Page: LumenRT 2015 Requirements
Product(s): Bentley LumenRT Version(s): 15.50.25.70 Environment: N\A Area: N/A Subarea: N\A LumenRT is a 64 bit software. This document includes installation requirements, processing and navigation platform requirements and recommended requirements. Bentley LumenRT provides a complete solution for creating professional quality images, videos, and immersive media directly from your CAD/BIM solutions including MicroStation software based, Autodesk Revit , Graphisoft ArchiCAD , Trimble Sketchup, Esri CityEngine . Installation Requirements Supported Operating Systems: Windows 10 (64-bit), Windows 8 (64-bit), Windows 7, Windows 7 (64 bit), Windows Vista, Windows Vista (64-bit). Processing/Authoring Platform Requirements This is the machine on which you will export your scene and author animations inside the LumenRT Live Cube. • nVidia GeForce 400 GT class GPU or better or ATI Radeon 5800 class GPU or better video board, with at least 1 GB VRAM • 2GHz Intel processor or faster (multi-core CPU recommended) • 2GB of free RAM (4GB recommended) • 4GB of free Hard Disk space. Navigation/Viewing Platform Requirements This is the machine on which you or your client will navigate and explore published LumenRT Live Cubes. The more complex your model is, the more graphic power it will require. • nVidia GeForce 400 GT class GPU or better or ATI Radeon 5800 class GPU or better video board, with at least 1 GB VRAM • 2GHz Intel processor or faster • 1GB of free RAM (4GB recommended) • 200MB of free Hard Disk space. See Also Original Author: Mara Manconi
↧
Wiki Page: LumenRT does not exports trucks
Product(s): Bentley LumenRT Version(s): 15.50.25.70 Environment: N\A Area: N/A Subarea: N\A Problem When the VISSIM script is exported through MicroStation to LumenRT, the trucks are no longer included Solution 1. Unzip the file attached 2. Place the file VISSIM2LumenRT.py into the folder "C:\Program Files\e-on software\LumenRT 2015" replacing the old file 3. Delete the file VISSIM2LumenRT.py (Please visit the site to view this file) See Also Original Author: Mara Manconi
↧
Wiki Page: LumenRT Objects
Product(s): Bentley LumenRT Version(s): 15.50.25.70 Environment: N\A Area: N/A Subarea: N\A You can import/add your objects in a LumenRT scene by using one of the following file formats: Supported import formats: - Large Objects *.lob (delivered with the software under the following categories: Plants, Characters, Cars, Indoor objects, Outdoor objects, Buildings, Lights. They are the "Contents" of LumenRT)) - Vue objects *.vob - Shade format objects *.shd - Raw format objects *.raw - Collada format objects *.dae - Fbx format objects *.fbx - Objects Wavefront *.obj - 3D studio export *.3ds See Also Original Author: Mara Manconi
↧
Wiki Page: Microstation V8i (multiple versions) crashes when exported into LumenRT
Product(s): Bentley LumenRT Version(s): N\A Environment: N\A Area: N/A Subarea: N\A Problem Complex geometry (more than 200 MB) exported from Microstation V8i crashes, but same Model exported from Microstation Connect does not have any problem. No specific error message is shown. Solution Please use the “Large Model Export” style of export in the LumenRT menu. This takes longer but it can export any sized model without running out of memory: See Also Original Author: Mara Manconi
↧
↧
Wiki Page: Microstation Connect Edition Update 2 crashes when export to LumenRT
Product(s): Bentley LumenRT Version(s): 15.50.25.XX Environment: N\A Area: N/A Subarea: N\A Problem Description I am using Microstation Update 2 and I want to export my *.dgn into LumenRT, but the software crashes: Steps to Resolve if you use the export icon in Visualization>LumenRT>Export: Microstation crashes, please avoid this option 2. Please use the export icon in Visualization>Home>LumenRT See Also Original Author: Mara Manconi
↧
Forum Post: RE: Microstation CONNECT unable to draw short lines?
What are your units...and how far from 0,0,0 are you are trying to draw the line? Maybe post a dgn? -B
↧
Forum Post: print organizer not printing correctly
Hi, I am having an issue with the print organizer, the output print is not printing correctly, they have some black fill. I noticed that this happen happen when I have the linestyle in the display tab check. in addition the print comes out fine when I use the regular print dialogue box
↧
Forum Post: RE: print organizer not printing correctly
Would you please give us more details: 1. What version of MicroStation? 2. If Line Styles are turned off in the Display tab, are all lines printing solid and you get no shape filled in black in Print Organizer? 3. Is this behavior file specific? 4. Does it matter what printer driver configuration file you use? 5. Has file printed correctly before from Print Organizer? 6. If using a Print Style in Print Organizer are you using same Print Style in the print dialog? 7. Would it be possible to get a copy of the file or files?
↧
↧
Forum Post: Fast Clicking Issue? Connect U4
Good day All, I have been having some troubles when (for example) I begin a 3 point arc, tentative click for the second/end point, then go to place the third and final point of that arc Microstation will have placed the arc already before I have made my third click to accept the 3 point arc. Of course, that arc did not get my third point correctly and I now have an arc that I have to replace. I have never had this problem before and I am thinking it may just be some setting with Connect. Consider that I have done some testing with this and the problem seems to only occur when I am tentative clicking then left click accepting very close in time to each other.
↧
Forum Post: RE: print organizer not printing correctly
Thank you ed, now it seems to print Ok when I unchecked "open design files in read-only mode" box in the PO preferences
↧
Forum Post: RE: print organizer not printing correctly
Thanks for the update. The workflow you are using must require that the design files be opened in read/write mode. You should see the same behavior in MicroStation if you were to check "Open as read-only" in MicroStation file manager window.
↧
Forum Post: RE: Command Line Arguments not processing in Update 4
Ray, -wr will define the workspace root path. This argument by itself as far as I can tell does not "process" any files. See what is on help: "Specifies the path to the workspace's root (_USTN_WORKSPACEROOT). Example: -wrC:\Bentley\Workspace" Is ther some other argument used?
↧
↧
Forum Post: RE: What is the difference between Microstation and STAAD Pro?
here is information on both products that you can review. www.bentley.com/.../microstation www.bentley.com/.../staadpro
↧
Forum Post: RE: Fast Clicking Issue? Connect U4
Have you look at your preferences (Settings -> User -> Preferences) as far as Input options. The Hold delay could be too small. Also, Look and Feel - The single click option and also on Input, the Click sensitivity.
↧
Forum Post: RE: Command Line Arguments not processing in Update 4
most likely you will want to use the following switch instead -WC Specifies the configuration file MicroStation will use on startup (for example, -wcC:\Bentley\Workspace\Config\myconfig.cfg).
↧